Description
- Durch das zweistufig verdichtende 2-Zylinder-Hochleistungsaggregat wird eine sehr niedrige Drehzahl erzielt, wodurch ein besonders ruhiger und vibrationsarmer Lauf erreicht wird
- Dies gewährleistet eine längere Lebensdauer durch weniger Verschleiß
- Großes Lüfterrad und ein Kühlluftleitblech am Zylinder für optimale Kühlung des Verdichters
- Nachkühler mit Kühllamellen und Zwischenkühler zum Nachkühler sorgen für eine niedrige Behältereintrittstemperatur und so für weniger Feuchtigkeit in der Druckluft
- Qualitätselektromotor mit hohem Anzugsmoment
- Elektromotor mit Motorschutzschalter ausgestattet
- Mit hochwertigem CONDOR Druckschalter
- Ausgestattet mit einem Manometer für Behälterdruck und einem Kugelhahn am Druckluftbehälter
- Druckluftbehälter ausgestattet mit Sicherheitsventil, Behälterdruckmanometer und Kondensatablasshahn
- Zehn Jahre Garantie gegen Durchrostung auf pulverbeschichteten Druckluftbehälter
- Mit allen Sicherheitseinrichtungen
- Komplett anschlussfertig
- Stabiler Riemengitterschutz aus Metall
- Inklusive Schwingelemente
- Anschluss durch Elektrofachkraft
Features
| Abgabeleistung | 4 kW |
|---|---|
| Abmessung (L x B x H) | 720 x 720 x 1770 mm |
| Ansaugleistung | 650 l/min |
| Anschlussspannung | 400 V |
| Anzahl der Verdichtungsstufen | 2 |
| Anzahl der Zylinder | 2 |
| Behälterinhalt | 270 l |
| Breite/Tiefe (Produkt) ca. | 720 mm |
| Drehzahl | 950 1/min |
| Erläuterung Fülleistung | bei 6 bar Arbeitsdruck |
| Erläuterung Schalldruckpegel | Schalldruckpegel in 1 m Abstand nach DIN 45635 T 13 |
| Füllleistung bei 6 bar ca. | 520 l/min |
| Füllleistung ca. | 520 l/min |
| Gewicht (netto) ca. | 160 kg |
| Gewicht ca. | 160 kg |
| Höchstdruck | 10 bar |
| Höhe (Produkt) ca. | 1770 mm |
| Länge (Produkt) ca. | 720 mm |
| Luftabgang |
|
| Motorleistung | 4 kW |
| Netzanschluss | 400 V |
| Netzfrequenz | 50 Hz |
| Schalldruckpegel Lp | 80 dB(A) |
| Schalldruckpegel- 1 m Abstand nach DIN 45635 | 80 dB (A) |
| Verdichter Drehzahl | 950 min¯¹ |
| Verdichtersystem | HOS |
| Zylinder/Stufen | 2/2 |
Ersatzteile
Zubehör
obligatorisch
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
96103 Hallstadt
0951/96555-0
www.stuermer-maschinen.de
info@stuermer-maschinen.de
Safety regulations
General safety instructions
• All electrical connections must be made by an authorized electrician
• Machines may only be operated with functioning safety devices
• Only allow trained personnel to operate the machine
• Maintenance and repair work may only be carried out by trained personnel
• Never work under the influence of illnesses that impair concentration, medication, drugs or alcohol
• Machines must always be disconnected from the power supply before maintenance or repair work
• Wear tight-fitting clothing and remove all objects that could cause you to get caught in machines.
• Use original spare parts and accessories
• Keep body parts away from moving parts of the machines.
• In the event of a malfunction or unusual behavior, operation must be stopped immediately until the cause has been clarified and the error has been rectified.
• Avoid overloading machines. Always work within the permitted performance range (technical data)
• Always ensure that no one is in the danger areas of the machines.
• Before using the machines, make sure that the safety devices are working properly
• Read the operating instructions and familiarize yourself with the safety devices.
• Keep the work area clean and tidy to minimize sources of danger
• Do not make any changes to machines
• Wear hearing protection to protect your hearing
• Wear appropriate safety gloves when handling chemicals or sharp objects
• Wear appropriate safety shoes to protect your feet
• Wear appropriate safety clothing
• Always observe and follow all safety instructions that are attached to the product or included with the product.
