Description
Features
| Abgabeleistung | 630 W |
|---|---|
| Bohr-Ø Beton | 22 / 13 mm |
| Bohr-Ø Beton, bis | 13 mm |
| Bohr-Ø Beton, von | 22 mm |
| Bohr-Ø Holz | 40 / 25 mm |
| Bohr-Ø Holz, bis | 25 mm |
| Bohr-Ø Holz, von | 40 mm |
| Bohr-Ø Mauerwerk | 24 / 16 mm |
| Bohr-Ø Mauerwerk, bis | 16 mm |
| Bohr-Ø Mauerwerk, von | 24 mm |
| Bohr-Ø Stahl | 16 / 8 mm |
| Bohr-Ø Stahl, bis | 8 mm |
| Bohr-Ø Stahl, von | 16 mm |
| Bohr-Ø Stein | 24 / 16 mm |
| Bohr-Ø Stein, bis | 16 mm |
| Bohr-Ø Stein, von | 24 mm |
| Bohrfutter, Ausführung |
|
| Bohrfutterspannbereich, max. | 13 mm |
| Bohrfutterspannbereich, min. | 1.5 mm |
| Bohrfutterspannbereich, min./max. | 1.5 - 13 mm |
| Drehmoment, max. | 40.0 / 14.5 Nm |
| Drehmoment, max., 1. Gang | 40.0 Nm |
| Drehmoment, max., 2. Gang | 14.5 Nm |
| Gewicht | 2.9 kg |
| Leerlaufdrehzahl | 0 - 900 / 3000 U/min |
| Leerlaufdrehzahl, 1. Gang | 0 - 900 min-1 |
| Leerlaufdrehzahl, 1. Gang, bis | 900 U/min |
| Leerlaufdrehzahl, 1. Gang, von | 0 U/min |
| Leerlaufdrehzahl, 2. Gang | 3000 U/min |
| Leerlaufdrehzahl, 2. Gang, von | 3000 min-1 |
| Nenndrehmoment | 9.6 / 3.2 Nm |
| Nenndrehmoment, 1. Gang | 9.6 Nm |
| Nenndrehmoment, 2. Gang | 3.2 Nm |
| Nenndrehzahl | 580 / 1900 min-1 |
| Nenndrehzahl, 1. Gang | 580 min-1 |
| Nenndrehzahl, 2. Gang | 1900 min-1 |
| Nenneingangsleistung | 1100 W |
| Schlagzahl bei Leerlaufdrehzahl | 0 - 15300 / 51000 bpm |
| Schlagzahl bei Leerlaufdrehzahl, 1. Gang, bis | 15300 bpm |
| Schlagzahl bei Leerlaufdrehzahl, 1. Gang, von | 0 bpm |
| Schlagzahl bei Leerlaufdrehzahl, 2. Gang | 51000 bpm |
| Schwingungsemissionswert ah [Bohren in Metall] | 5.6 m/s² |
| Schwingungsemissionswert ah [Gewindeschneiden] | 2.5 m/s² |
| Schwingungsemissionswert ah [Schlagbohren in Beton] | 14.6 m/s² |
| Schwingungsemissionswert ah [Schrauben] | 2.5 m/s² |
| Unsicherheit K [Bohren in Metall] | 1.5 m/s² |
| Unsicherheit K [Gewindeschneiden] | 1.5 m/s² |
| Unsicherheit K [Schlagbohren in Beton] | 1.8 m/s² |
| Unsicherheit K [Schrauben] | 1.5 m/s² |
| Verpackungsabmessungen (Breite x Länge x Höhe) | 404 x 440 x 119 mm |
| Verpackungsabmessungen (Breite) | 404 mm |
| Verpackungsabmessungen (Höhe) | 119 mm |
| Verpackungsabmessungen (Länge) | 440 mm |
| Werkzeugabmessungen (Breite) | 90 mm |
| Werkzeugabmessungen (Höhe) | 220 mm |
| Werkzeugabmessungen (Länge) | 335 mm |
Sonstiges
Zubehör
Hauptartikel
Ursprungsartikel
Manufacturer
Robert Bosch Power Tools GmbH
Max-Lang-Str. 40-46
70771 Leinfelden-Echterd.
www.bosch-pt.de
kontakt@bosch.de
Safety regulations
General safety instructions
• All electrical connections must be made by an authorized electrician
• Machines may only be operated with functioning safety devices
• Only allow trained personnel to operate the machine
• Maintenance and repair work may only be carried out by trained personnel
• Never work under the influence of illnesses that impair concentration, medication, drugs or alcohol
• Machines must always be disconnected from the power supply before maintenance or repair work
• Wear tight-fitting clothing and remove all objects that could cause you to get caught in machines.
• Use original spare parts and accessories
• Keep body parts away from moving parts of the machines.
• In the event of a malfunction or unusual behavior, operation must be stopped immediately until the cause has been clarified and the error has been rectified.
• Avoid overloading machines. Always work within the permitted performance range (technical data)
• Always ensure that no one is in the danger areas of the machines.
• Before using the machines, make sure that the safety devices are working properly
• Read the operating instructions and familiarize yourself with the safety devices.
• Keep the work area clean and tidy to minimize sources of danger
• Do not make any changes to machines
• Wear hearing protection to protect your hearing
• Wear appropriate safety gloves when handling chemicals or sharp objects
• Wear appropriate safety shoes to protect your feet
• Wear appropriate safety clothing
• Always observe and follow all safety instructions that are attached to the product or included with the product.
