Description
- Ø 315 mm Hauptsägeblatt mit 100 mm max. Schnitthöhe, die auch bei eingebautem Vorritzsägeblatt erreicht wird
- Sägeaggregat schwenkbar von 90° bis -45°
- Perfekt für die Plattenbearbeitung dank einstellbarem Vorritzsägeblatt
- Hochpräziser Format-Schiebeschlitten aus eloxiertem Aluminium
- Mit Materialrolle und ausziehbarem Aluminium-Teleskopanschlag
- Schwenkbare Frässpindel
- Vier Fräsgeschwindigkeiten
Features
| Abgabeleistung Fräse | 2,2 kW |
|---|---|
| Abgabeleistung Säge | 2,4 kW |
| Absaugstutzendurchmesser | 100 mm |
| Absaugstutzendurchmesser Sägeblattschutz | 30 mm |
| Anschläge | Ein Klappanschlag |
| Anschlussspannung | 400 V |
| Aufnahmeleistung Fräse | 2,8 kW |
| Aufnahmeleistung Säge | 3 kW |
| Besäumlänge | 2600 mm |
| Besäumrahmen | mit winkelverstellbarem Ablänganschlag mit einem Klappansch |
| Besäumschuh | Ja |
| Breite/Tiefe (Produkt) ca. | 700 mm |
| Drehzahl (Haupt-)Sägeblatt | 4500 min?¹ |
| Durchmesser (Haupt-)Sägeblatt | 315 mm |
| Durchmesser Vorritzsägeblatt | 90 mm |
| Eloxierter Aluminium-Formatschiebeschlitten | Ja |
| Exzenterspanner | ja |
| Formatschiebeschlittenbreite | 270 mm |
| Formatschiebeschlittenhöhe | 95 mm |
| Formatschiebeschlittenlänge | 2600 mm |
| Fräsanschlag | mit Aluminium-Anschlagbacken |
| Gewicht (Netto) ca. | 425 kg |
| Griff für Schiebeschlitten | Ja |
| Höhe (Produkt) ca. | 1120 mm |
| Höhenverstellung der Spindel | manuell |
| Höhenverstellung des Sägeblatts | manuell |
| Länge (Produkt) ca. | 1540 mm |
| Leerlauf Schalldruckpegel | 90,2 dB(A) |
| Materialrolle am Besäumrahmen | Ja |
| Max. Schnitthöhe 45° | 80 mm |
| Max. Schnitthöhe 90° | 100 mm |
| Neigungsverstellung der Spindel | manuell |
| Neigungsverstellung des Sägeblatts | manuell |
| Netzfrequenz | 50 Hz |
| Nutzlänge der Spindel | 100 mm |
| Säge-Parallelanschlag | mit Rundstangenführung |
| Sägeblattneigung | 45 – 90 ° |
| Spindeldorndurchmesser | 30 mm |
| Spindeldrehzahlen | 1800/3000/6000/9000 min?¹ |
| Spindelneigung | 0 – 45 ° |
| Steuerung Sägeblatthöhe, -schwenkung und Parallelanschlag | manuell |
| Tischbreite | 380 mm |
| Tischlänge | 1650 mm |
| Tischverbreiterung | Ja |
| Tischverlängerung | ja |
| Vorritzeinrichtung | Ja |
| Werkzeugdurchmesser max. | 200 mm |
Zubehör
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
96103 Hallstadt
0951/96555-0
www.stuermer-maschinen.de
info@stuermer-maschinen.de
Safety regulations
General safety instructions
• All electrical connections must be made by an authorized electrician
• Machines may only be operated with functioning safety devices
• Only allow trained personnel to operate the machine
• Maintenance and repair work may only be carried out by trained personnel
• Never work under the influence of illnesses that impair concentration, medication, drugs or alcohol
• Machines must always be disconnected from the power supply before maintenance or repair work
• Wear tight-fitting clothing and remove all objects that could cause you to get caught in machines.
• Use original spare parts and accessories
• Keep body parts away from moving parts of the machines.
• In the event of a malfunction or unusual behavior, operation must be stopped immediately until the cause has been clarified and the error has been rectified.
• Avoid overloading machines. Always work within the permitted performance range (technical data)
• Always ensure that no one is in the danger areas of the machines.
• Before using the machines, make sure that the safety devices are working properly
• Read the operating instructions and familiarize yourself with the safety devices.
• Keep the work area clean and tidy to minimize sources of danger
• Do not make any changes to machines
• Wear hearing protection to protect your hearing
• Wear appropriate safety gloves when handling chemicals or sharp objects
• Wear appropriate safety shoes to protect your feet
• Wear appropriate safety clothing
• Always observe and follow all safety instructions that are attached to the product or included with the product.
