Description
- Typische Einsatzbereiche: Karosseriereparaturen/Instandsetzung, Landwirtschaft, Heftschweißungen
- Energieeffizient dank moderner Invertertechnik
- Digitale Anzeige u.a. für Schweißstrom und Drahtvorschubgeschwindigkeit
- Grundwerkstoffe: Baustähle, CrNi-Stähle ferritisch/austenitisch und Duplex-Stähle
- Stufenlos einstellbarer Drahtvorschub
- S-Zeichen: Zugelassen zum Schweißen an engen Schweißplätzen mit erhöhter elektrischer Gefährdung
- Einfache Bedienung und Einstellung
- Der weiche und stabile Lichtbogen garantiert spritzerarme Schweißergebnisse
- Praktische Gasflaschenhalterung
- Robustes Fahrwerk mit Lenkrollen für einen einfachen Transport
- Zwei Jahre Schweißkraft-Garantie
- Schweißbrenner SMB 36/4
- Korbspulenadapter
- Gasschlauch 1,5 m
- Massekabel 3 m
- Druckminderer groß
- Netzkabel mit 5-poligem Stecker 32A
Features
| Absicherung träge (400V CEE-Stecker) | 25 A |
|---|---|
| Anschlusskabellänge | 4 m |
| Anschlussspannung | 400 V |
| Bauform | kompakt |
| Breite/Tiefe (Produkt) ca. | 540 mm |
| Brennerkühlung | Luft |
| Dauerleistung bei ED 100% | 8,3 kVA |
| Drahtvorschubeinheit | 4 Rollen |
| Drahtvorschubgeschwindigkeit | 0,8 – 22 m/min |
| Drahtvorschubrollen angetrieben | 4 Rollen |
| Einschaltdauer bei max. Strom 40°C | 60 % |
| Einstellbereich Elektrode | 30 – 320 A |
| Einstellbereich MIG/MAG | 35 – 350 A |
| EMV-Klasse | A |
| Erforderliche Generatorleistung | 25 kVA |
| Gewicht (Netto) ca. | 33 kg |
| Höhe (Produkt) ca. | 700 mm |
| Kennzeichnung | S |
| Kühlart | AF |
| Länge (Produkt) ca. | 795 mm |
| Leerlaufspannung | 80 V |
| Leistungsaufnahme MIG/MAG | 13,8 kVA |
| Leistungsfaktor | 0,95 cos phi |
| Negative Netzspannungstoleranz | 10 % |
| Netzfrequenz | 50 Hz |
| Norm | EN 60974-1; EN 60974-10 |
| Positive Netzspannungstoleranz | 10 % |
| Schaltstufen | Stufenlos |
| schweißbare Drähte Aluminium | 1,0 – 1,2 mm |
| schweißbare Drähte CuSi | 0,8 – 1,0 mm |
| schweißbare Drähte Edelstahl | 0,8 – 1,2 mm |
| schweißbare Drähte Fülldraht | 1,0 – 1,2 mm |
| schweißbare Drähte Stahl | 0,6 – 1,2 mm |
| Strom bei ED 100% 40 °C | 250 A |
| Strom bei ED 60% 40°C | 350 A |
| Stromaufnahme | 20 A |
| Verfahren MIG/MAG | Ja |
| Verfahren MMA | Ja |
| Wirkungsgrad | 86 % |
Zubehör
Bestehend aus
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
96103 Hallstadt
0951/96555-0
www.stuermer-maschinen.de
info@stuermer-maschinen.de
Safety regulations
General safety instructions
• All electrical connections must be made by an authorized electrician
• Machines may only be operated with functioning safety devices
• Only allow trained personnel to operate the machine
• Maintenance and repair work may only be carried out by trained personnel
• Never work under the influence of illnesses that impair concentration, medication, drugs or alcohol
• Machines must always be disconnected from the power supply before maintenance or repair work
• Wear tight-fitting clothing and remove all objects that could cause you to get caught in machines.
• Use original spare parts and accessories
• Keep body parts away from moving parts of the machines.
• In the event of a malfunction or unusual behavior, operation must be stopped immediately until the cause has been clarified and the error has been rectified.
• Avoid overloading machines. Always work within the permitted performance range (technical data)
• Always ensure that no one is in the danger areas of the machines.
• Before using the machines, make sure that the safety devices are working properly
• Read the operating instructions and familiarize yourself with the safety devices.
• Keep the work area clean and tidy to minimize sources of danger
• Do not make any changes to machines
• Wear hearing protection to protect your hearing
• Wear appropriate safety gloves when handling chemicals or sharp objects
• Wear appropriate safety shoes to protect your feet
• Wear appropriate safety clothing
• Always observe and follow all safety instructions that are attached to the product or included with the product.
