Description
Die Antriebe der Serie ZRL1F umfassen die Kolbendurchmesser 16, 25, 32, 40, 50 und 63 mm bei Hublängen bis 5700 mm. Geeignet für gefilterte (50 µm) und ungeölte oder geölte Druckluft. Bitte achten Sie bei der Verwendung von geölter Druckluft auf kontinuierliche Ölung.
Die verfügbaren Varianten und deren entsprechende Typenbezeichnungen für Ihre individuelle Anfrage entnehmen Sie bitte unserem Typenschlüssel im Datenblatt.
Auf Anfrage sind auch weitere Sonderausführungen möglich.
Nach Auftragseingang werden die Zylinder individuell für Sie gefertigt.
In der Regel erfolgt der Versand abhängig von der Stückzahl innerhalb von 5 Werktagen.
Fracht- und Verpackungskosten fallen individuell und unabhängig vom Auftragswert an.
Features
| Anschluss | G 1 /4 |
|---|---|
| Arbeitsdruck max. | 8 bar |
| Arbeitsdruck min. | 0,5 bar |
| Dämpfung | mit einstellbarer Dämpfung |
| Dichtbänder | Edelstahl |
| Dichtmaterial | Ölbeständiger Kunststoff (NBR) |
| Funktion | doppeltwirkend |
| Hub | 830 mm |
| Kolben-Ø | 50 mm |
| Kolbenkappen und Gleitteile | abriebfester Kunststoff |
| Magnet | mit Magnet |
| Temperaturbereich max. | 80 °C |
| Temperaturbereich min. | -10 °C |
| Zolltarifnummer | 84123100 |
Zubehör
Manufacturer
Riegler & Co. KG
Schützenstr. 27-29
72574 Bad Urach
07125/9497-0
www.riegler.de
info@riegler.de
Safety regulations
General safety instructions
• All electrical connections must be made by an authorized electrician
• Machines may only be operated with functioning safety devices
• Only allow trained personnel to operate the machine
• Maintenance and repair work may only be carried out by trained personnel
• Never work under the influence of illnesses that impair concentration, medication, drugs or alcohol
• Machines must always be disconnected from the power supply before maintenance or repair work
• Wear tight-fitting clothing and remove all objects that could cause you to get caught in machines.
• Use original spare parts and accessories
• Keep body parts away from moving parts of the machines.
• In the event of a malfunction or unusual behavior, operation must be stopped immediately until the cause has been clarified and the error has been rectified.
• Avoid overloading machines. Always work within the permitted performance range (technical data)
• Always ensure that no one is in the danger areas of the machines.
• Before using the machines, make sure that the safety devices are working properly
• Read the operating instructions and familiarize yourself with the safety devices.
• Keep the work area clean and tidy to minimize sources of danger
• Do not make any changes to machines
• Wear hearing protection to protect your hearing
• Wear appropriate safety gloves when handling chemicals or sharp objects
• Wear appropriate safety shoes to protect your feet
• Wear appropriate safety clothing
• Always observe and follow all safety instructions that are attached to the product or included with the product.
