Description
Application: - Work independently. • High efficiency thanks to brushless motor. • Basic unit cordless impact wrench (without rechargeable battery, charger, case). • 18 V, 5 Ah. • Three selectable power levels for torque tightening: - Level 1 80 N m at 0 – 600 rpm (0 – 1200 impacts/min) - Level 2 300 N m at 0 – 1400 rpm (0 – 2500 impacts/min) - Level 3 500 N m at 0 – 2000 rpm (0 – 3400 impacts/min). • Illumination of the work area before the output begins to move. • Amperage without load: 5.5 A. • Net weight: 1.86 kg (without rechargeable battery). • Dimensions including rechargeable battery: 204 x 64 x 259 mm. • Including belt clip, attachable on both sides. • Brushless DC motor (BLDC)• Longer service life, less wear, no need to change the carbon brushes. • High efficiency and hence less battery consumption. • More compact motor enables smaller dimensions. • Recommended torque: 500 Nm. • Sound power level: 110.4 db(A) Lp W. • Vibration acceleration: 20.30 m/s2. • Loosening torque (max) determined with screw size M: 16. • Forward and reverse: multi-stage (right/left). • Output: 1/2 inch (12.5 mm) square, solid. • Dimensions / length: 204 mm. • For impact operation. • Tightening torque max N m: 500 Nm. • Loosening torque maximum [N m]: 700 Nm. • Sound pressure level: 99.4 dB(A) Lp A. • Revolutions per minute: 0 – 2000. Do you know – Li-Ion batteries: • Do not have any memory effect. • Consist of cells with 3.6 V each. • After full charge they have a higher voltage than 3.6 V i.e. 5 cells each 3.6 V = 18 V – but after full charge a peak voltage of up to 20 V is possible - Attention: For a longer lifetime of the battery please store it charged up to 50 to 80 % only. • Have an energy density which is twice as high as nickel cadmium batteries, for example. • Have a nominal voltage three times higher than a nickel metal hydride battery. • Require multiple complete charging cycles to reach full capacity.
Features
Abmessungen / Länge | 204 mm |
Abtrieb | Vierkant massiv 12,5 mm (1/2 Zoll) |
Akkukapazität [Ah] | 5 Ah |
Akkuspannung [V] | 18 V |
Anwendungsbereich | MOTOR > Abgasanlage/Lambdasonde |
Anzugs-Drehmoment max Nm | 500 Nm |
Anzugs-Drehmoment max. lbf.ft | 368.78 lbf.ft |
Anzugs-Drehmoment maximal | 500 Nm |
Batterien zum Betrieb erforderlich | true |
Batterien/Akkus zum Betrieb erforderlich | true |
Bezeichnung Produktgruppe | Abgasanlagen-Werkzeug |
Branche | Pkw |
eCl@ss 8.0 Basic Produktklasse | 21040107 |
Empfohlenes Drehmoment | 500 Nm |
Ersatzteil |
|
Gefahrstoff-Kennzeichnung | false |
Handgriff | T-Griff aus Kunststoff |
hz-class Hauptklasse | 600140 Motor - Abgasanlage · Lambdasonde |
hz-class Unterklassen | 260120 Sonstige Spezial-Abzieher · Auszieher |
Kapitel/Kernkompetenz | HAZET 6 Spezialwerkzeuge |
Länge | 204 mm |
Leerlaufdrehzahl | 0 upm |
Lösemoment (max) ermittelt mit Schraubengröße M | 16 M |
Lösemoment max (lbf.ft) | 516.29 lbf.ft |
Lösemoment maximal | 700 Nm |
Lösemoment maximal [Nm] | 700 Nm |
Material | Spezialstahl |
Netto-Gewicht (kg) | 0.09 kg |
Netzstecker | Keine Stecker |
Produktempfehlung |
|
Produktgruppe | 4684 |
Produktstatus - Freigabe | Vertriebsfreigabe |
Produktstatus - gültig bis | 2021-12-31 00 |
Publikation | HAZET Werkzeug-Handbuch |
Rechts-/Linkslauf | mehrstufig (links/rechts) |
Schall-Druckpegel (bei Betriebsdruck) | 99.4 dB(A) Lp A |
Schall-Leistungspegel (bei Betriebsdruck) | 110.4 db(A) Lp W |
Schluesselworte | Akku-Werkzeug |
Umdrehungen/Minute (maximal) | 2000 upm |
Umdrehungen/Minute (minimal) | 0 upm |
Vibrationsbeschleunigung | 20.30 m/s2 |
Zubehör |
|
Oberfläche | verchromt |