Description
- Entwickelt für den Schnitt von Vollmaterial
- ein hydraulisches System steuert die automatisierten Arbeitsabläufe der Maschine
- Bandführung mit einstellbaren Hartmetallplatten
- Endschalter steuern die obere und untere Position des Sägearms
- Linearführungen an beiden Säulen sorgen für ein perfektes Schnittergebnis
- Laufräder geneigt für eine längere Standzeit des Sägebandes
- Bedienung auf modernem und leistungsstarkem Siemens HMI Multitouch-Panel
- Sägeband
- Bedienwerkzeug
- Zwei Arbeitsplatzbeleuchtungen
- ARP-System
- Späneförderer
- Frequenzumrichter
- Kühlsystem an den Sägebandführungen
- Motorisch angetriebene Späneräumbürste
- Automatische Bandführungseinstellung
Features
| Anschlussspannung | 400 V |
|---|---|
| Breite/Tiefe (Produkt) ca. | 2350 mm |
| Geschwindigkeitsstufen | stufenlos |
| Gewicht (netto) ca. | 25000 kg |
| Gewicht ca. | 25000 kg |
| Höhe (Produkt) ca. | 4000 mm |
| Länge (Produkt) ca. | 6200 mm |
| Leistung Antriebsmotor | 11 kW |
| max. Vorschublänge bei 1x Vorschub | - |
| Min. Restwerkstücklänge CNC-Betrieb | - |
| min.Restwerkstücklänge man.Betrieb | - |
| Motorleistung 400 V /50 Hz | 11 kW |
| Netzfrequenz | 50 Hz |
| Sägebandabmessungen | 11650 x 80 x 1,6 mm |
| Sägebandbreite | 80 mm |
| Sägebanddicke | 1,6 mm |
| Sägebandgeschwindigkeit(en) | 15 – 80 m/min |
| Sägebandgeschwindigkeiten | 15 - 80 m/Min. |
| Sägebandlänge | 11650 mm |
| Schnittbereich 0° Bündel (Rohr) | 1200 x 680 mm |
| Schnittbereich 0° rechteck liegend (Hohlprofil) | 1200 x 1400 mm |
| Schnittbereich 0° rund (Rohr) | 1200 mm |
| Schnittbereich 0° rund (Vollmaterial) | 1200 mm |
| Schnittbereich 0° Rundmaterial | 1200 |
| Schnittbereich 0° Rundrohr-Vollmaterial | 1200 |
| Schnittbereich 0° Vierkantmaterial liegend | 1200 x 1400 mm |
| Schnittbereich 0° Vierkantmaterial stehend | x |
| Schnittbereich Bündel Rundmaterial | x |
| Schnittbereich Bündel Rundrohr-Vollmaterial | x |
| Schnittbereich Bündel Vierkantmaterial liegend | 1200 x 800 mm |
| Schnittbereich Bündel Vierkantmaterial stehend | x |
| Stellfläche (LxBxH) | 6200 x 2350 x 4000 mm |
| Tischhöhe Materialzufuhr | 800 mm |
Zubehör
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
96103 Hallstadt
0951/96555-0
www.stuermer-maschinen.de
info@stuermer-maschinen.de
Safety regulations
General safety instructions
• All electrical connections must be made by an authorized electrician
• Machines may only be operated with functioning safety devices
• Only allow trained personnel to operate the machine
• Maintenance and repair work may only be carried out by trained personnel
• Never work under the influence of illnesses that impair concentration, medication, drugs or alcohol
• Machines must always be disconnected from the power supply before maintenance or repair work
• Wear tight-fitting clothing and remove all objects that could cause you to get caught in machines.
• Use original spare parts and accessories
• Keep body parts away from moving parts of the machines.
• In the event of a malfunction or unusual behavior, operation must be stopped immediately until the cause has been clarified and the error has been rectified.
• Avoid overloading machines. Always work within the permitted performance range (technical data)
• Always ensure that no one is in the danger areas of the machines.
• Before using the machines, make sure that the safety devices are working properly
• Read the operating instructions and familiarize yourself with the safety devices.
• Keep the work area clean and tidy to minimize sources of danger
• Do not make any changes to machines
• Wear hearing protection to protect your hearing
• Wear appropriate safety gloves when handling chemicals or sharp objects
• Wear appropriate safety shoes to protect your feet
• Wear appropriate safety clothing
• Always observe and follow all safety instructions that are attached to the product or included with the product.
