Description
- Zum Elektroden-, MIG/MAG- und WIG-Schweißen und zum Schleifen geeignet
- Bestnoten bei der Bewertung der optischen Klasse, Streuklasse, Homogenitätsklasse und Klasse der Winkeleigenschaften
- Schweißen in Echtfarben dank True Color Kassette
- Luftfiltersystem der Klasse TH3 versorgt den Schweißer mit gefilterter, sauberer Luft und verhindert so das Einatmen gefährlicher und gesundheitsschädlicher Partikel und Schweißdämpfe; die nach innen gerichtete Leckage des Gesamtsystems (Helm und Luftfiltereinheit) beträgt nicht mehr als 0,2%
- Hohe Filterwirkung: 99,996% aller Partikel bis zu einer Größe von 0,185 µm werden aus der Luft gefiltert
- Drei Gebläsestufen wählbar
- Luftverteilung im Schweißhelm kann verstellt werden
- Li-ION Akku mit bis zu 8 Stunden Laufzeit
- Schweißhelm mit Luftfiltersystem
- Stoffschutz
- Batterieladegerät
- Atemschlauch und Hülle
- Durchflussmesser
- Gepolsterter Hüftgurt und doppelter Schultergurt
- Schwarze Tragetasche
Features
| Anzahl Sensoren | 4 |
|---|---|
| Aufhellzeit dunkel-hell | 100 – 900 ms |
| Aufhellzeit dunkel-hell Regulierung | stufenlos einstellbar |
| Batterie austauschbar | ? |
| Batterietyp | 3V Lithium Batterie (CR2450) |
| Erläuterung zu Gewicht | Einheit, Batterie, Halter, Schlauch |
| Filter Akku Laufzeit Stufe 1 | 8 h |
| Filter Akku Laufzeit Stufe 2 | 6 h |
| Filter Akku Laufzeit Stufe 3 | 4 h |
| Filter Effizienz | 99,996 % (0,185µm) |
| Filtertyp | TH3 P R SL |
| Gewicht (netto) ca. | 2463 g |
| Gewicht (Netto) ca. | 2463 g |
| Hellstufe | Schutzstufe 4 |
| Kassette Breite | 133 mm |
| Kassette Höhe | 9,5 mm |
| Kassette Länge | 114 mm |
| Klasse | 1/1/1/1 |
| Luftfluss Gebläseatemschutz Stufe 1 | 170 l/min |
| Luftfluss Gebläseatemschutz Stufe 2 | 200 l/min |
| Luftfluss Gebläseatemschutz Stufe 3 | 230 l/min |
| Maske Material | Nylon |
| Reaktionszeit hell-dunkel | 0,08 ms |
| Sichtfenster Breite | 83.4 mm |
| Sichtfenster Höhe | 100 mm |
| Solarzellen | ? |
| UV-/IR-Schutz | Schutzstufe DIN 15 (permanent) |
Zubehör
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
96103 Hallstadt
0951/96555-0
www.stuermer-maschinen.de
info@stuermer-maschinen.de
Safety regulations
General safety instructions
• All electrical connections must be made by an authorized electrician
• Machines may only be operated with functioning safety devices
• Only allow trained personnel to operate the machine
• Maintenance and repair work may only be carried out by trained personnel
• Never work under the influence of illnesses that impair concentration, medication, drugs or alcohol
• Machines must always be disconnected from the power supply before maintenance or repair work
• Wear tight-fitting clothing and remove all objects that could cause you to get caught in machines.
• Use original spare parts and accessories
• Keep body parts away from moving parts of the machines.
• In the event of a malfunction or unusual behavior, operation must be stopped immediately until the cause has been clarified and the error has been rectified.
• Avoid overloading machines. Always work within the permitted performance range (technical data)
• Always ensure that no one is in the danger areas of the machines.
• Before using the machines, make sure that the safety devices are working properly
• Read the operating instructions and familiarize yourself with the safety devices.
• Keep the work area clean and tidy to minimize sources of danger
• Do not make any changes to machines
• Wear hearing protection to protect your hearing
• Wear appropriate safety gloves when handling chemicals or sharp objects
• Wear appropriate safety shoes to protect your feet
• Wear appropriate safety clothing
• Always observe and follow all safety instructions that are attached to the product or included with the product.
