Description
Features
| 1000 V isoliert | 0 |
|---|---|
| Abstand Gehäuse - Mitte Antrieb | 327 mm |
| Abstand Gehäuse - Vierkantmitte | 34,5 mm |
| Antriebstyp/Antrieb | Durchsteckvierkant |
| Antriebsvierkant | 3/4 Zoll |
| Antriebsvierkant [metrisch] | 20 mm |
| Antriebsvierkant [zöllig] | 3/4" |
| Antriebsvierkant Nenngröße | 20,0 mm |
| Anzahl Zähne | 36 |
| Anzugsrichtung | Links und Rechts |
| Arbeits-/Messbereich lbf.ft (min/max) | 110-550 lbf·ft |
| Arbeits-/Messbereich N·m (min/max) | 150-750 N·m |
| Auslösegenauigkeit | ± 3 % |
| Auslösemechanik | Kurzwegauslösung |
| Drehmoment (max.) |
|
| Drehmoment (max.) [lbf·ft] | 550 lbf·ft |
| Drehmoment (max.) [N·m] | 750 N·m |
| Drehmoment (min.) |
|
| Drehmoment (min.) [lbf·ft] | 110 lbf·ft |
| Drehmoment (min.) [N·m] | 150 N·m |
| Einsatzbereich | Montage Wartung und Instandhaltung |
| Entfernung Griffmitte bis Drehpunkt | 1.128,7 mm |
| Gesamtbreite | 69 mm |
| Gesamtbreite [mm] | 69 mm |
| Gesamthöhe | 58,2 mm |
| Gesamthöhe [mm] | 51 mm |
| Gesamtlänge [mm] | 1.235 mm |
| Gewicht kg | 4,500 kg |
| Höhe | 38,0 mm |
| Inhalt (Anzahl Stück) | 1 tlg. |
| Kalibrierlänge | 1128,7 mm |
| Kopfbreite 1 | 69 mm |
| Kopfbreite 1 [mm] | 69,0 mm |
| Kopfdurchmesser | 69 mm |
| Kopfhöhe 1 | 38 mm |
| Kopfhöhe 1 [mm] | 38 mm |
| Länge | 1240 mm |
| Länge (L, L1) | 1.232,5 mm |
| Marke | GEDORE |
| Nennbreite [mm] | 69 mm |
| Nennhöhe [mm] | 51,2 mm |
| Nennlänge [mm] | 1232,5 mm |
| Netto-Gewicht | 5400 g |
| Netto-Gewicht [g] | 4602 g |
| Netto-Gewicht [kg] | 5,4 kg |
| Nonius Nm | 1 N·m |
| Präzision +/- | +/- 3 % |
| Prüfzertifikat | DIN EN ISO 6789-2 |
| REACH Registrierung vorhanden | Nein |
| Rückschwenkwinkel | 10 ° |
| Skalenbereich in (lbf) max. | 550 lbf·ft |
| Skalenbereich in (lbf) min. | 110 lbf·ft |
| Skalenbereich in (Nm) max. | 750 N·m |
| Skalenbereich in (Nm) min. | 150 N·m |
| Skaleneinteilung |
|
| Skaleneinteilung [lbf·ft] | 10 lbf·ft |
| Skaleneinteilung [n·m] | 10 N·m |
| Skalenring-Einteilung | 1 N·m |
| Skalentyp | Dual |
| Ursprungsland | Deutschland |
| VDE zertifiziert | 0 |
| Vierkantantrieb | 3/4 Zoll |
| Zielgruppen | Automotive Industrie Bau- und Nutzfahrzeuge Verbraucher Energie Maschinenbau Werkstatt Service Agriculture Oil & Gas Utilities |
| Zolltarifnummer | 82041100 |
| Gesamtlänge | 1232 mm |
Sonstige
Manufacturer
GEDORE-Werkzeugfabrik GmbH & Co. KG
Remscheider Str. 149
42899 Remscheid
02191/596900
www.gedore.de
zentrale@gedore.de
Safety regulations
General safety instructions
• All electrical connections must be made by an authorized electrician
• Machines may only be operated with functioning safety devices
• Only allow trained personnel to operate the machine
• Maintenance and repair work may only be carried out by trained personnel
• Never work under the influence of illnesses that impair concentration, medication, drugs or alcohol
• Machines must always be disconnected from the power supply before maintenance or repair work
• Wear tight-fitting clothing and remove all objects that could cause you to get caught in machines.
• Use original spare parts and accessories
• Keep body parts away from moving parts of the machines.
• In the event of a malfunction or unusual behavior, operation must be stopped immediately until the cause has been clarified and the error has been rectified.
• Avoid overloading machines. Always work within the permitted performance range (technical data)
• Always ensure that no one is in the danger areas of the machines.
• Before using the machines, make sure that the safety devices are working properly
• Read the operating instructions and familiarize yourself with the safety devices.
• Keep the work area clean and tidy to minimize sources of danger
• Do not make any changes to machines
• Wear hearing protection to protect your hearing
• Wear appropriate safety gloves when handling chemicals or sharp objects
• Wear appropriate safety shoes to protect your feet
• Wear appropriate safety clothing
• Always observe and follow all safety instructions that are attached to the product or included with the product.
