Description
Druckluftanlagen oder Teile von Anlagen können durch ein elektrisches Signal ein- oder ausgeschaltet werden. 3/2-Wege-Ausführung inklusive Schalldämpfer.
Beim Abschalten wird die Anlage gleichzeitig entlüftet.
Features
| a | 85 mm |
|---|---|
| A | 85,0 mm |
| Abluft | G 1/2 |
| Anschlussgewinde | Werkstoff Zink-Druckguss |
| Anzugsleistung bei Wechselspannung 50 Hz | 2.2 VA |
| B | 177.7 mm |
| Baugröße | 4 |
| BG | 4 |
| C | 110.7 mm |
| Durchfluss | 12500 l/min |
| Durchflusswertmessung | bei P<sub>2</sub> = 6 bar und Druckabfall ?<sub>p</sub> = 1 bar |
| Eingangsdruck max. | 10 bar |
| Eingangsdruck min. | 2 bar |
| Einschaltdauer | 100 % |
| Elektrischer Anschluss | Gerätesteckdose EN 175301-803, Form C, Polzahl 2+PE |
| Elektrischer Anschluß | Gerätesteckdose EN 175301-803, Form C, Polzahl 2+PE |
| Gehäuse | PA66 GF60 |
| Gewinde | G 1 |
| Halteleistung bei Wechselspannung 50 Hz | 1.6 VA |
| Leistungsaufnahme | 2,5 Watt bei Gleichspannung |
| Medium | Druckluft, neutrale Gase |
| Schutzart | IP 65 |
| Serie | FUTURA |
| Temperaturbereich max. | 50 °C |
| Temperaturbereich min. | -10 °C |
| Zolltarifnummer | 84812090 |
Zubehör
Ersatzteil
Manufacturer
Riegler & Co. KG
Schützenstr. 27-29
72574 Bad Urach
07125/9497-0
www.riegler.de
info@riegler.de
Safety regulations
General safety instructions
• All electrical connections must be made by an authorized electrician
• Machines may only be operated with functioning safety devices
• Only allow trained personnel to operate the machine
• Maintenance and repair work may only be carried out by trained personnel
• Never work under the influence of illnesses that impair concentration, medication, drugs or alcohol
• Machines must always be disconnected from the power supply before maintenance or repair work
• Wear tight-fitting clothing and remove all objects that could cause you to get caught in machines.
• Use original spare parts and accessories
• Keep body parts away from moving parts of the machines.
• In the event of a malfunction or unusual behavior, operation must be stopped immediately until the cause has been clarified and the error has been rectified.
• Avoid overloading machines. Always work within the permitted performance range (technical data)
• Always ensure that no one is in the danger areas of the machines.
• Before using the machines, make sure that the safety devices are working properly
• Read the operating instructions and familiarize yourself with the safety devices.
• Keep the work area clean and tidy to minimize sources of danger
• Do not make any changes to machines
• Wear hearing protection to protect your hearing
• Wear appropriate safety gloves when handling chemicals or sharp objects
• Wear appropriate safety shoes to protect your feet
• Wear appropriate safety clothing
• Always observe and follow all safety instructions that are attached to the product or included with the product.
